Dealer login
ТМ Status

Type – textured, configuration – profiled structure, mechanically embossed

Hot embossed wallpaper is a new say in the wallcovering industry. This wallpaper has a solid upper PVC layer (thicker than that of foamed vinyl), and the texture is achieved by embossing the hot canvas with cold calender. In this process wallcoverings acquire increased strength and wear resistance. The thick vinyl layer and deep embossing ensure maximum resemblance to fabric, leather, plaster or wood.

Embossed wallpaper always gives a quality feeling to the premises; the wall surface becomes dimensional and is perceived as endless textile expanse, creating a cozy and luxurious setting in combination with other interior design items.


TM Status paper-backed vinyl wallpaper

This kind of wallcovering (so called heavy vinyl) has a solid PVC substrate (thicker than that of foamed vinyl) onto which paint is applied by a special technique with further embossing. The pattern is raised by hot embossing which ensures particular quality and durability of the material and creates elegant surface.

PROPERTIES:

  • reliability and durability;
  • high light fastness (tolerance to sunlight);
  • water resistance (washable and cleanable to varying degrees);
  • high papering speed (owing to minimum time needed for wallpaper to soak);
  • the texture retains its original appearance at the time of wallpaper hanging and throughout its lifespan;
  • when stripped from walls or ceilings, the wallpaper peels off in layers: the vinyl layer is removed along with the thin cellulose base, and the base paper layer remains on the wall.

GENERAL SPECIFICATIONS

Dimensions

10.05 m х 0.53 m = 5.3 m²


Average roll weight
1.5-2.1 kg
Roll diameter9-10 cm
Papering base

Primed and puttied walls, ceilings. The surface must be clean, smooth, dry, absorbent and plain.

Paste

It is recommended to use STATUS paste for this wallpaper type. 


ТМ Status vinyl wallpaper with non-woven backing

This product from EDEM Factory combines the benefits of hot-embossed vinyl wallpaper and wallcoverings with non-woven backing.

The progressive pattern-raising method (hot embossing) gives the wallpaper its high-quality durable structure and elegant surface. This type of wallcoverings is installed just as easily as the vinyl wallpaper with non-woven backing. This is the best solution in terms of handling, quality features and esthetic characteristics.

PROPERTIES:

  • reliability and durability;
  • high mechanical strength;
  • high light fastness (tolerance to sunlight);
  • water resistance (washable and cleanable to varying degrees);
  • the texture retains its original appearance at the time of wallpaper hanging and throughout its lifespan;
  • no pre-pasting (the paste is applied directly onto the wall, dry wallpaper is placed on the wall and cut). This advanced technology helps save time significantly and minimize the costs;
  • the non-woven backing is less prone to deformation in the course of hanging than paper;
  • the 1.06 m width reduces the quantity of joints twofold;
  • in case of repapering the wallpaper is strippable without residues - the sheet is removed entirely.

GENERAL SPECIFICATIONS

Dimensions

10.05 m х 1.06 m = 10.65 m²

Roll weight

2.4-3.8 kg

Roll diameter

7-9 cm

Papering base

Primed and puttied walls, ceilings. The surface must be clean, smooth, dry, absorbent and plain.

Paste

It is recommended to use STATUS paste for non-woven wallpaper.

Dealer account is under construction

Восстановить пароль

Неправильный имейл
На указанный email было выслано письмо со ссылкой для восстановления пароля.